Haas UMC-750 Machining Center for Five-Sided and Five-Axis Machining
Five-axis machining is becoming increasingly popular as a means to reduce setups and increase accuracy for multi-sided and complex parts. The new UMC-750 universal machining center from Haas Automation, Inc., is a cost-effective solution for five-sided and simultaneous five-axis machining.
The UMC-750 is a versatile five-axis 40-taper vertical machining center with 30" x 22" x 20" travels and an integrated dual-axis trunnion table. The machine is equipped with an 8100rpm inline direct-drive spindle, and comes standard with a 40+1 tool side-mount tool changer.
The UMC-750’s dual-axis trunnion table can position parts to nearly any angle for five-sided (3+2) machining, or provide full simultaneous five-axis motion for contouring and complex machining. The trunnion provides +35 and -110 degrees of tilt and 360 degrees of rotation for excellent tool clearance and large part capacity, and the 630mm x 500mm table features standard T-slots and a precision pilot bore for fixturing versatility.
The machine’s 8100rpm inline direct-drive spindle is powered by a 30hp vector drive system. The Haas inline system couples the spindle directly to the motor to reduce heat, increase power transmission, and provide excellent surface finishes. For shops wanting higher spindle speeds, an optional 12,000rpm inline direct-drive spindle is available. Both spindles yield 90ft-lb of cutting torque.
A wide selection of high-productivity options are available for the UMC-750, as well, including a belt-type chip conveyor, high-pressure through-spindle coolant systems, high-speed machining control software, the Haas Wireless Intuitive Probing System, expanded program memory, and much more.
Haas Automation, Inc.
2800 Sturgis Rd.
Oxnard, CA 93030
Phone: (805) 278-1800
http://www.Haascnc.com