The new 1/2 NPT Super Air Nozzle from EXAIR delivers 3.3 lbs. of blowing force when mounted 12-in. away from the target. The force is more than 4× that of ordinary air nozzles, making it well-suited for blowing heavy materials or for applications where the air nozzle can't be mounted close to the surface to be blown-off, dried, or cooled.
The aerodynamic design of the 1/2 NPT Super Air Nozzle directs the air to a single point of convergence, delivering a concentrated stream of high-velocity airflow with hard-hitting force measured in pounds, not ounces. The compressed air is ejected through a series of holes located in recessed grooves on the nozzle surface. This assures safe operation since the airflow that exits the nozzle can not be blocked, as required by OSHA.
At 80 PSIG, the air consumption is 60 SCFM. The sound level of 87 dBA is below the limits of the OSHA maximum allowable noise exposure.
The aerodynamic design of the 1/2 NPT Super Air Nozzle directs the air to a single point of convergence, delivering a concentrated stream of high-velocity airflow with hard-hitting force measured in pounds, not ounces. The compressed air is ejected through a series of holes located in recessed grooves on the nozzle surface. This assures safe operation since the airflow that exits the nozzle can not be blocked, as required by OSHA.
At 80 PSIG, the air consumption is 60 SCFM. The sound level of 87 dBA is below the limits of the OSHA maximum allowable noise exposure.