Conducting More than 7,900 Hot Fire Tests

Along with testing engines and a variety of propellants and propulsion systems, Moog ISP manufactures liquid rocket engines, tanks and propulsion systems for satellites and launch vehicles.

Moog ISP conducts hot fire tests at its Niagara Falls, N.Y. facility. The Moog facility includes four vacuum-capable rocket test cells and one sea-level-capable rocket test cell. In 2012, Moog performed hot fire tests on engines (ranging in thrust levels from approximately 250 lbf to less than 1 lbf) for commercial and military clients, including Sandia and MELCO.

“We currently consider Moog ISP to be our preferred supplier for hot gas propulsion systems,” said Kendall Key, payloads manager at Sandia National Laboratories.

“When selecting spacecraft instruments, performance and reliability are the most important criteria,” said Masato Kotani, system engineer at MELCO. “We work with Moog ISP because we have always been completely satisfied with the in-orbit performance of their products.”

According to Thomas Donnelly, Propulsion Test Manager for Moog ISP, the number of engines fired in 2012 was approximately 50 percent higher than the mark hit in 2011. And the total number of engines hot fire tested in 2012 exceeded the amount fired in 2010 by more than 100%.

“The utilization rate for our five test cells is approximately 90%, and we are now building a sixth vacuum-capable rocket test cell in Niagara Falls that we expect to operate by the end of 2013,” Donnelly says.

Ordinarily, Moog ISP assembles all of the engines and propulsion systems it tests at its Niagara Falls facility. Once an engine is tested for pressure, flow and vibration, it is then hot fired to verify performance characteristics such as thrust and chamber temperature prior to delivery to the customer.

http://www.moog.com/products/propulsion-controls/