Trending products to spec

Flat cable assemblies

Flat cable assemblies offer consistent electrical characteristics, space and weight savings, EMI/RFI suppression, and cable flexibility. Individual components are encapsulated in a shock-absorbent jacket. The flat cable can incorporate a variety of components including power conductors, controlled impedance pairs, shielded control wires, video conductors, multi-layer shielding options, and Cicoil’s StripMount fastening strip. Assemblies are available in continuous lengths, break-outs, custom shapes, cut to order, or as assemblies with connectors.

Cicoil Corp.

www.cicoil.com

Modular platform

The IIC MICA modular platform of open hardware and software has a virtual industrial computing software platform based on Linux. The platform enables the visualization of applications on field devices without the overhead. All applications run in sandboxes in virtual containers that hold all required libraries and drivers for that application.

Harting North America

www.harting.com

Bandwidth platform

Two plastic-packaged 50V/60W GaN devices provide power and bandwidth for communications applications. The CGHV27060MP supports a range of frequencies spanning UHF through 2.7GHz. The CGHV35060MP operates from 2.7GHz to 3.5GHz. Both of the 50V GaN HEMTs are compatible with industry standard digital pre-distortion correction methods to increase amplifier efficiency and their miniature (4.5mm x 6.5mm) plastic overmold packaging makes them an ideal solution for higher volume applications.

Wolfspeed

www.wolfspeed.com

Waveguide attenuators

Waveguide attenuators operating at 110GHz that can vary the attenuation level from 0dB to 30dB over the specified band. They come in five models covering broad frequencies from 33GHz to 110GHz in five bands. Attenuation is adjusted using a micrometer, and the attenuators feature low insertion loss ranging from 0.5dB to 1.0dB and flat performance across a wide band and across various attenuation levels.

Fairview Microwave

www.fairviewmicrowave.com

Transceivers

Three ISL7202xSEH radiation-tolerant 3.3V controller area network (CAN) transceivers provide serial data transmission between a CAN controller and CAN bus at speeds up to 1Mbps. Up to 20 transceivers can be connected to a single CAN bus to reduce cabling/harness size, weight, and power costs. The transceivers are low-dose rate tested up to 75Krad on a wafer-by-wafer basis and reduce system level bit error rates.

Intersil Corp.

www.intersil.com

Threshold detectors

Three models of threshold detectors are designed for microwave and millimeter wave applications from 2GHz to 40GHz. One model supports a fixed threshold while the other two models support an adjustable threshold setting. All models feature a TTL-compatible video output response which is one when RF signal is above the threshold and zero when it is below the threshold setting.

Pasternack

www.pasternack.com

DC power supply

B&K Precision’s DC power supply automatically recalculates voltage and current limits for each setting and can provide wide voltage and current operating ranges while maintaining high output power. It features independent voltage and current control knobs, cursors, a numerical keypad, and internal memory storage.

B&K Precision

www.bkprecision.com

DC-DC converters

The TLB5 series of 5W DC-DC converters feature low noise of 10mVp-p and 89% power supply efficiency in a 1.25" x 0.80" x 0.40" package. The converters reduce electromagnetic interference while offering overcurrent, short circuit, undervoltage, and overvoltage protection. They provide 1600VDC input to output isolation and a 4:1 wide input voltage range.

Polytron Devices

www.polytrondevices.com