Planetary Reducers

KRP+ planetary reducers are the single drive components in a family of reducers dedicated to rack and pinion, and rotary table drive applications.


KRP+ planetary reducers are the single drive components in a family of reducers dedicated to rack and pinion, and rotary table drive applications. They can be used alone as a single drive or combined with a second unit to create a zero-backlash rack and pinion axis. As a single drive, the KRP+ features an integral output pinion and planetary gear train that have been optimized for minimum backlash (1 to 3 arc minutes) and maximum stiffness on rack. In-line and right angle versions are available.

The dual drive kit combines two KRP+ reducers in a mechanically preloaded, zero-backlash system. The two units are torsionally preloaded against the rack in this closed loop mechanical system. Only one motor is required to drive the axis. Two KRP+ reducers can also be combined together in an electrically preloaded twin drive kit. Backlash is eliminated using two motors, one to drive the axis and one to preload the axis.

KRP+ reducers come in six sizes with ratios from 5:1 to 91:1 allowing linear speeds up to 3,100ipm (78mpm) and moving masses up to 200,000 lb. (91,000kg)

IMTS BOOTH B-6042
Andantex USA Inc.
Wanamassa, NJ
andantex.com

July August 2008
Explore the July August 2008 Issue

Check out more from this issue and find your next story to read.