Pitbull Clamps

The Mitee-Bite Pitbull clamp is a new fixture clamp with positive down force and a low gripping profile.


The Mitee-Bite Pitbull clamp is a new fixture clamp with positive down force and a low gripping profile. High vertical and horizontal clamping forces are generated, considering the size of the Pitbull Clamps. It uses a standard cap screw and an oil resistant O-ring. The Pitbull Clamp is available in five sizes and several styles, a tool steel knife edge for aggressive stock removal, a tool steel blunt edge for general purpose and a brass version to help prevent marring the workpiece.

Also on display will be Series-9 clamps, an adjustable cam action clamp for those parts that vary in size. The Series-9 clamps are manufactured so each clamping surface is 1mm greater in distance from the centerline then the previous surface. So by rotating the hex the clamp can hold parts that vary up to 6mm.

IMTS BOOTH F-2280
Mitee-Bite Products Inc,
Center Ossipee, NH
miteebite.com

Read Next

Truing, Dressing

July August 2008
Explore the July August 2008 Issue

Check out more from this issue and find your next story to read.