The Quick Loc (QL) pallet system provides fixture solutions on horizontal, vertical, and rotary operations. Low-profile adapters and pallets ensure 0.0003" repeatability and provide clamping forces of nearly 14,000 lb. A single drive screw is used for fast operation.
Configurable QL systems are available in multiple styles including square, rectangle, round receivers, and cubes in 52mm and 96mm patterns.
Jergens Inc.
http://www.jergensinc.com
Double-cut carbide burrs
The double-cut carbide burr line, made up of 30 different tools, provides surface removal on demanding production runs with fewer changeovers. They remove surface stock and weld splatter, deburr and chamfer applications, and medium-to-light cleaning. Tool geometries meet demands for stainless steel, steel, cast steel, and composite applications. The burrs also perform well at higher temperatures.
The hardness of a tungsten carbide substrate, stronger tooth formulation, and numerous cutting edges extend tool life and improve stock removal performance.
Norton Abrasives
https://www.nortonabrasives.com/en-us
500°F universal oven
No. 856 is a 500°F (260°C) special universal oven for curing composite parts in vacuum bags. The 42" x 40" x 50" oven features 48kW of Incoloy- sheathed tubular heating elements, while a 4,200cfm, 3hp recirculating blower provides universal airflow.
The oven has 4" insulated walls and Type 430 stainless steel interior. Features include an integral leg stand and four levels of two 3/8" national pipe thread (NPT) pipe ports connected to common manifold. There is also a vacuum gage and ball valve on each port.
Grieve Corp.
https://www.grievecorp.com
Explore the January February 2019 Issue
Check out more from this issue and find your next story to read.
Latest from Aerospace Manufacturing and Design
- OMIC R&D hosts Supporting Women in Manufacturing Day 2024
- 4D Technology's AccuFiz SWIR interferometer
- Seventh Lockheed Martin-built GPS III satellite launches
- KYOCERA AVX's CR Series high-power chip resistor
- UT researchers receive Air Force grant for wind tunnel
- Monticont's linear voice coil servo motor
- FAA certifies Pratt & Whitney GTF engine to power the Airbus A321XLR
- Wevo's silicone gap filler
