NASA has selected 14 American companies as partners whose technologies will help enable the agency’s Moon to Mars exploration approach.
The selections are based on NASA’s fourth competitive Tipping Point solicitation and have a combined total award value of about $43.2 million. This investment in the U.S. space industry, including small businesses across the country, will help bring the technologies to market and ready them for use by NASA.
“These promising technologies are at a ‘tipping point’ in their development, meaning NASA’s investment is likely the extra push a company needs to significantly mature a capability,” said Jim Reuter, associate administrator of NASA’s Space Technology Mission Directorate (STMD). “These are important technologies necessary for sustained exploration of the Moon and Mars. As the agency focuses on landing astronauts on the Moon by 2024 with the Artemis program, we continue to prepare for the next phase of lunar exploration that feeds forward to Mars.”
The selections address technology areas such as cryogenic propellant production and management, sustainable energy generation, storage and distribution, efficient and affordable propulsion systems, autonomous operations, rover mobility, and advanced avionics. The selected proposals, organized by technology area, are:
Cryogenic Propellant Production and Management
• Blue Origin LLC of Kent, Washington, $10 million
A ground demonstration of hydrogen and oxygen liquefaction and storage, representing rocket and spacecraft propellant that could be produced on the Moon. The demonstration could help inform a large-scale propellant production plant suitable for the lunar surface.
• OxEon Energy LLC of North Salt Lake, Utah, $1.8 million
OxEon Energy will work with the Colorado School of Mines to integrate an electrolysis technology to process ice and separate the hydrogen and oxygen. The molecules could then be cooled to produce fuel for cislunar transport. This technology could provide a flexible and scalable solution for future in-situ resource utilization operations on the Moon.
• Skyre Inc. of East Hartford, Connecticut, $2.6 million
Skyre, also known as Sustainable Innovations, along with partner Meta Vista USA LLC, will develop a system to make propellant from permanently frozen water located at the Moon’s poles, including processes to separate the hydrogen and oxygen, keep the product extremely cold and use hydrogen as a refrigerant to liquefy oxygen.
• SpaceX of Hawthorne, California, $3 million
SpaceX will collaborate with NASA’s Marshall Space Flight Center in Huntsville, Alabama, to develop and test coupler prototypes – or nozzles – for refueling spacecraft such as the company’s Starship vehicle. A cryogenic fluid coupler for large-scale in-space propellant transfer is an important technology to aid sustained exploration efforts on the Moon and Mars.
Sustainable Energy Generation, Storage and Distribution
• Infinity Fuel Cell and Hydrogen Inc. of Windsor, Connecticut, $4 million
The company will collaborate with NASA’s Johnson Space Center in Houston to develop a scalable, modular and flexible power and energy product that uses new manufacturing methods to reduce cost and improve reliability. The technology could be used for lunar rovers, surface equipment, and habitats.
• Paragon Space Development Corporation of Houston, Texas, $2 million
Paragon Space Development Corp. will work with Johnson and NASA’s Glenn Research Center in Cleveland, Ohio, to develop an environmental control and life support system as well as a thermal control system for lunar missions that maintain acceptable operating temperatures throughout the Moon’s day and night cycle. The design of these systems could be adapted for crewed missions to Mars.
• TallannQuest LLC of Sachse, Texas, $2 million
Working with NASA’s Jet Propulsion Laboratory in Pasadena, California, the company, also known as Apogee Semiconductor, will develop a flexible, radiation-hardened switching power controller capable of being configured based on a mission’s power needs. This technology could be used for missions to the Moon, Mars, Jupiter’s moon Europa, and other destinations.
Efficient and Affordable Propulsion Systems
• Accion Systems Inc. of Boston, Massachusetts, $3.9 million
The first interplanetary CubeSats, NASA’s MarCO-A and B, used a set of cold gas thrusters for attitude control and course corrections during their cruise to Mars, alongside the Mars InSight lander. Accion and JPL will partner to mature a propulsion system to demonstrate the same capabilities as those required for the MarCO mission, but with a smaller and lighter system that uses less power. The propulsion system could enable more science opportunities with these small, flexible platforms.
• CU Aerospace LLC of Champaign, Illinois, $1.7 million
CU Aerospace, NearSpace Launch, and the University of Illinois at Urbana-Champaign will build and test a 6-unit CubeSat equipped with two different propulsion systems. These systems were developed with NASA Small Business Innovation Research (SBIR) funding and offer high performance, low cost and safe pre-launch processing. The company plans to deliver the flight-ready CubeSat to NanoRacks for launch and deployment.
• ExoTerra Resource LLC of Littleton, Colorado, $2 million
ExoTerra will build, test and launch a 12-unit CubeSat with a compact, high impulse solar electric propulsion module. Once flight-ready, the system will be demonstrated in-space as the CubeSat moves from low-Earth orbit to the radiation belts surrounding Earth. This small electric propulsion system could open the inner solar system for targeted science exploration missions, using affordable spacecraft that range from 44 lb to 440 lb.
Autonomous Operations
• Blue Canyon Technologies Inc. of Boulder, Colorado, $4.9 million
As access to space increases, so does the need for ground resources, such as tracking stations. With an in-space demonstration, Blue Canyon Technologies will mature an autonomous navigation software solution for SmallSats and CubeSats so they can traverse space without talking to Earth.
Rover Mobility
• Astrobotic Technology of Pittsburgh, Pennsylvania, $2 million
Astrobotic and Carnegie Mellon University will work with JPL and NASA’s Kennedy Space Center in Florida to develop small rover scouts that can host payloads and interface with multiple large landers. This project received previous NASA funding through SBIR awards. The new partnership will develop more mature payload interfaces and increase rover capabilities.
Advanced Avionics
• Intuitive Machines LLC of Houston, Texas, $1.3 million
Development of a spacecraft vision processing computer and software to reduce the cost and schedule required for deploying optical, or laser, navigation capabilities on government and commercial missions.
• Luna Innovations of Blacksburg, Virginia, $2 million
Luna Innovations is partnering with Sierra Nevada Corp., ILC Dover, and Johnson to prove the viability of sensors that monitor the structural health and safety of inflatable space habitats located in orbit or on the surface of other worlds.
Through firm-fixed-price contracts, STMD will make milestone payments over a performance period of up to 36 months. Each industry partner is required to contribute a minimum percent, based on the company’s size, of the total cost for each project.
STMD develops transformative space technologies to enable future missions. Tipping Point projects are managed by programs within STMD and in some cases include collaborations with NASA centers.
NASA’s Artemis lunar exploration program includes sending a suite of new science instruments and technology demonstrations to study the Moon, landing the first woman and next man on the lunar surface by 2024, and establishing a sustained presence by 2028. The agency will leverage its Artemis experience and technologies to prepare for the next giant leap – sending astronauts to Mars.
Latest from Aerospace Manufacturing and Design
- Molex to acquire AirBorn
- Nano Dimension's Exa 250vx digital light processing (DLP) 3D printer
- IMTS 2024 Booth Tour: Fagor Automation Corp.
- How Robotics and Automation are Transforming Manufacturing
- Wichita State’s NIAR delivers fiber metal laminate test panel to FAA
- Walter's PCD milling cutters
- IMTS 2024 Booth Tour: Marubeni Citizen-Cincom, Inc.
- Mazak celebrates 50th anniversary in Kentucky