CNC flat bed lathe
The F-20 CNC flat bed lathe, part of the Standard Modern line, offers hardened, ground bedways and X- and Z-axis ball screws for accurate machining. Hand-scraping provides a precise bearing surface. The high-precision, dynamically balanced spindle features three-point roller bearings and a heavy-duty camlock. The CNC control uses Siemens ShopTurn programming software. Other standard features include an electric cabinet heat exchanger, hydraulic 8-position tool changer, chip conveyor, and front-panel USB and RJ45 interfaces.
Available in three lengths, the F-20 is one of four Standard Modern CNC lathe models for training/tool room, slant bed, flat bed, and big-bore options.
Racer Machinery Int’l Inc.
Solid carbide milling cutters
MC232 Perform solid carbide milling cutters, for shops that frequently machine small- and medium-lot sizes, are appropriate for a large range of materials. The cutter is available with 2, 3, or 4 flutes, in a 1/8" to 5/8" (2mm to 20mm) diameter range. Smaller diameters come with cylindrical shanks, and larger diameters use Weldon shanks for higher horsepower cutting.
With features including center-cutting capable geometry, 35° spiral, and WJ30ED grade, the shoulder/slot cutters can perform lateral and pocket milling, slotting, ramping, and helical plunging.
Walter USA LLC
Pass-through parts washer
The Renegade I-series pass-through washer system delivers 3-stage continuous cleaning to wash, rinse, and dry complex, multi-ported parts transported via an inline, conveyorized roller. Each wash-and-rinse-stage compartment contains spray manifolds with nozzles delivering high-pressure force and high-temperature cleaning. The dry stage compartment’s air blower removes residual water from hard-to-reach cavities.
Conveyor tunnel or flow-through cleaning systems are designed for high-production, repetitive cleaning operations, and stages can be configured in any order.
Renegade parts washers are designed to work with Renegade solvent-free detergents to avoid residue buildup.
Service Line Inc.
Explore the June 2017 Issue
Check out more from this issue and find your next story to read.
Latest from Aerospace Manufacturing and Design
- Boeing strike ends after more than 7 weeks
- Siemens acquires Altair Engineering
- Mitutoyo's Metlogix M3 with the Mitutoyo Quick Image Vision System
- IMTS 2024 Booth Tour: SW North America
- Eve Air Mobility receives $50 million
- Starrett's AVR400 vision metrology system
- IMTS 2024 Booth Tour: HAINBUCH America Corporation
- Applications open for 2025 EAA Aviation scholarships