
Multi-tasking machine
The Spark 2100 T multi-tasking machining center reduces setup time for lean manufacturing practices. The system has an additional turning table fixed in the horizontal machining center’s base that configures the machine as a vertical lathe for optimal performance, accuracy, and stability in turning mode.
The machine’s automatic tool change system (ATC) has an intermediate buffer for tool pre-setting, providing tool change times in less than 8 seconds. A fixed turning head with ATC is also available for deep internal turning operations. An optional, three-point supported, rigid, robust angle head support is offered for radial operation in the internal side of hollow workpieces. The multi-tasking machine also features a rotary table balance control device and tool management software.
Mandelli Sistemi SpA

Self-retaining ball plungers
Installed by hand in an ordinary drill hole, self-retaining ball plungers have a flexible design and compensate for hole tolerances up to 0.008". The slotted end of the thermoplastic body expands to compensate in an oversize hole. The sturdy shoulder of the press-fit ball plunger provides a fixed seating position and positively resists detent force. Available in four sizes, the plungers can be installed in a plain hole, with the shoulder exposed, or slightly counter-bored for flush installation.
Carr Lane Mfg. Co.
Turning tool system

TungTurn-Jet turning tools have high-pressure, double-jet coolant systems that deliver coolant close to cutting edges to form short chips when machining difficult-to-cut materials. Tool life is also extended using the double-jet, preventing flank wear on the insert.
Even when using normal coolant pressure and existing equipment, TungTurn-Jet improves tool life for stainless and alloy steels as well as heat- resistant super alloys. This product line expansion adds new lines to the ISO-EcoTurn range to further expand its turning capability.
Tungaloy America Inc.

Explore the March 2017 Issue
Check out more from this issue and find your next story to read.
Latest from Aerospace Manufacturing and Design
- Workholding solutions for your business
- DIMOR Group plans new Junkers factory in Battle Creek, Michigan
- SMW Autoblok's Manual Jack connection kit
- CMMC Roll Out: When Do I Need to Comply? webinar
- Embraer Phenom 300 most delivered light jet – again
- TJ Davies' custom machine components and retention knobs
- Archer receives FAA certification to launch its pilot training academy
- Monaghan Tooling 's DIATOOL Multi-Blade Monobloc Reamers