Automatic sawing machine
The CM602 can handle 4" tube and bar diameters depending on the material, and can achieve blade speeds up to 5,000rpm. The machine is useful in cutting short- and medium-length steel, copper, brass, and aluminum tubes, as well as solid bars and custom profiles. Its compact layout, rugged construction, and precise material handling makes it effective for continuous production operations.
CM602 assists the operator with step-by-step instructions before the machine selects the appropriate blade from its library, calculates the stroke, the cutting head feed rate, the blade speed, and then monitors the chip load. The material is loaded into the cutting area by a servomotor carriage, providing highly repeatable positioning and accuracy of the cut lengths. At the end of the cut, the bar is retracted to enable its detachment from the blade which preserves the material’s end finish and increases the saw blade’s lifetime. The cutting head is positioned at 45° to the tube surface and linear movement across the tube provides a uniform load on the blade, resulting in reduced noise and less scrap.
BLM Group USA
Atomizing spray nozzle
The 4 NPT No Drip Internal Mix is a deflected flat fan nozzle that atomizes fluid and sprays at a right-angle. This nozzle features positively stopping liquid flow when the compressed air is shut off, sealing off the flow of liquid and eliminating the possibility of drips.
The nozzles work for pressure-fed applications that don’t require independent air and liquid control. The nozzles are fully adjustable to minimize air and liquid consumption and have interchangeable liquid and air caps. All No Drip liquid nozzles are CE compliant and conflict-mineral free.
Exair Corp.
Explore the January February 2017 Issue
Check out more from this issue and find your next story to read.
Latest from Aerospace Manufacturing and Design
- 2024 Favorites: #10 Article – How 3D-printed aviation parts can accelerate return to air
- 2024 Favorites: #10 News – Boom Supersonic completes Overture Superfactory
- OMIC R&D hosts Supporting Women in Manufacturing Day 2024
- 4D Technology's AccuFiz SWIR interferometer
- Seventh Lockheed Martin-built GPS III satellite launches
- KYOCERA AVX's CR Series high-power chip resistor
- UT researchers receive Air Force grant for wind tunnel
- Monticont's linear voice coil servo motor
