High-Feed Program

Millstar's new high-feed (HF) program features profile and contour milling cutters with more stringent geometric form designed specifically for high-speed and high-performance machining applications.


Millstar's new high-feed (HF) program features profile and contour milling cutters with more stringent geometric form designed specifically for high-speed and high-performance machining applications. The HF program is available in a large selection of cutting diameters – 2mm to 4", and handles interrupted cuts while providing tremendous versatility. HF tooling options include:

  • solid carbide four-flute tooling from 2mm to 12mm diameter (0.125" to 0.500");
  • two- flute, single insert that fits into Millstar's standard CYF and TAF tool holders in diameter 10mm to 25mm diameter (0.375" to 1"); and
  • multiple flute, four rotational inserts from diameter 20mm to 100mm diameters (1" to 4").

Millstar's high-feed tooling can be used in diverse applications including: Roughing of all softer materials from mold steels to Titanium alloys; Nickel-based alloys and Stainless steel alloys when combined with Millstar's XRN coating; and Roughing of heat-treated materials up to 60HRc when combined with Millstar's HSN coating.

IMTS BOOTH F-2701
Millstar
Warren, MI
millstar.com

Read Next

Truing, Dressing

July August 2008
Explore the July August 2008 Issue

Check out more from this issue and find your next story to read.