Components

Watertight connector

The 0T series connector is a small-sized watertight connector using LEMO push-pull technology. Based on the LEMO B series, the 0T series connector includes an inner-sleeve and extra sealing to enable IP68 water protection. The 0T series is available in 2- to 9-contact configurations. Contacts can be terminated by soldering to the wire, crimping onto the wire, or directly to a printed circuit board. A keying system ensures correct connector alignment and the connector outer shell has full electromagnetic interference shielding.

Features

• Backwards compatible with LEMO B series
• Black-chrome or plated-brass outer shell finish
• Uses configurations and contact system from LEMO B series range

LEMO USA Inc.
www.lemo.com

Iso-drivider for space applications

The Iso-divider combines the functions of power dividers with ferrite isolators for a high-isolation power divider solution, making external isolators unnecessary for satellite receivers without introducing complex switch-based solutions. Integration of the two functions improves product reliability due to fewer external components, interconnects, and transitions. Marrying the power divider and isolators allows the performance of the integrated unit to be matched for better overall performance with reduced size and weight.

Crane Aerospace & Electronics
www.craneae.com

Differential pressure transducers

The PX509HL series industrial differential pressure transducers are shock and vibration rated with high accuracy and are designed to provide long life in industrial areas with containment pressures up to 10,000psi. The compensated overload range minimizes errors induced by large line pressures.

Specifications

• Shock: 50g
• Accuracy: ±0.08%
• Response time: <10ms
• Safe overpressure: 5,000psi
• Burst pressure: 10,000psi
• Operating temperature: -40ºC to 85°C
• Stability (1-yr): ±0.1% full scale typical
• Compensated line pressure: 0 to 2,000psi

Features

• Demountable electrical terminations or a fixed conduit fitting without trim pots
• Temperature compensated for thermal properties and long-term stability
• Compensated range of -20°C to 85°C
• User accessible potentiometers for zero and span

Omega Engineering Co.
www.omega.com

X-ray detectors for OEMs

Mythen2R high-performance microstrip X-ray detectors, used in laboratory and portable diffractometers, feature full-range titanium-to-silver detection, favorable signal-to-noise ratios, and can be combined into larger systems. The detectors come in two module designs: the 1,280-strip module for laboratory diffractometers, and the 640-strip module for portable diffractometers and robots for stress measurements. Detectors offer wide, angular coverage for simultaneous operation of up to four modules, achieved with a gap of 6mm between the sensitive areas of the modules.

Applications

• X-ray powder diffraction and scattering techniques
• Residual stress measurements
• Thin film and texture analysis
• Dispersive fluorescence spectroscopy

Features

• Strip width: 50µm, with thicknesses of 320µm, 450µm, and 1,000µm
• Strip length: 4mm and 8mm
• Optimal signal-to-noise ratios

Dectris Ltd.
www.dectris.com

Gigabit Ethernet switch

The 1008TX is a plug-and-play, unmanaged Gigabit Ethernet switch housed in a hardened, metal DIN-rail mountable enclosure designed to provide cost-effective, reliable performance in industrial environments. Suitable for mission-critical data acquisition, security and surveillance, control, and Ethernet I/O applications, the 1008TX delivers low latency and high bandwidth to industrial networks. The switch has eight 10/100/1000 Base-T(X) ports with support for jumbo frames, featuring an extended operating temperature and wider power input range than most competitive offerings.

Features

• -40°C to 85°C temperature range
• 4.6" x 1.5" x 4.0" packaging for space-constrained applications
• Redundant power inputs: 10VDC to 49VDC to stay online during power supply failure
• Hardened metal DIN-rail enclosure with tolerance for 50g shock and 200g vibration
• Environmental specifications: UL Class I, Div. 2 listing, CE and IEC 1613

Red Lion Controls
www.redlion.net

Tantalum chip capacitors

TCR professional series tantalum chip capacitors with conductive polymer electrodes are designed for high power DC-to-DC converters used in telecommunication, industrial, and avionics applications. The series exhibits high standard reliability of fewer than 0.5% failures per 1,000 hours at 85°C and rated voltage with 0.1Ω/V series impedance. Two capacitors – a 10V, 68µF and a 16V, 47µF – both have a ±20% capacitance tolerance and a DCL of 0.1CV, housed in an EIA 2917 case with a height of 2.9mm.

FYI

• Compatible with 3x reflow at 265°C, and RoHS compliant
• Chip capacitors available in EIA 1210, 2312, and 2917 size, 4.1mm height
• Packaged with pure tin terminations on 7" or 13" reels
• Tin/lead terminations available upon request

For more information about AVX’s TCR professional series tantalum chip capacitors, including a list of codes currently available as engineering samples, please visit http://goo.gl/bOHj3v.

AVX Corp.
www.avx.com

Broadband coaxial limiters

Common applications for RF limiters include electronic warfare, instrumentation, fiber optic communication systems, military communications, radar, SATCOM, point-to-point radio, telecom, data links, and R&D.

The limiters consists of seven designs operating across a frequency range in bands from 0.5GHz to 40GHz, and provide low-leakage power circuit protection of 10dBm to 15dBm.

Specifications

• Operating temperature: -54°C to +85°C
• Constructed with high-rel packages to meet
• MIL-STD-202 environmental conditions for humidity, shock, vibration, altitude, and temperature cycle
• CW power handling up to 100W peak power and recovery time of 10ns to 100ns

Pasternack Co.
www.pasternack.com