Components

Range of application heat shield materials

Heat shield materials produced by Thermal Ceramics range from high temperature ceramic fiber materials to microporous insulation, allowing them to be customized to each customer’s unique application needs.

Heat shield material benefits:

• Exceptional durability
• Low thermal conductivity
• Light weight
   

Heat shields available

• Shell
• Flexible
• Rigid box
• Integrated technology
   

Heat shield core materials

• Low bio-persistent superwool fiber
• Denka polycrystalline fiber
• Min-K and WDS microporous insulation

Morgan Advanced Materials
www.morganadvancedmaterials.com

Flat, flexible data cables

Thin profile and high strength wires provide solutions for confined spaces and compact devices. They excel in repetitive motion systems, and are immune to shock, vibration, harsh environments, and temperature extremes (-65°C to 165°C).

Data and video transmission cables include Cat5e, Cat6, dual shielded camera link, controlled impedance, USB 2.0 and 3.0, flexible coax (50? and 75?) and Firewire cables.

Flexx-Sil flat cables

• Consistent electrical characteristics
• Weight and space savings
• Large current carrying capacity
• Motion and performance requirements for data and video transmission applications

CICOIL
www.cicoil.com

Power supply three-phase option

Power supplies with three-phase variants (787-738, 787-740, 787-742) offer a wide input range of 325V to 800V and an output range of 22VDC to 28VDC in a compact metal housing for quick and easy DIN-rail mounting.

WAGO Corp.
www.wago.us

Zinc nickel-plated adapters

RoHS-compliant black-zinc-nickel Z plating for AS85049 adapters 82 to 90 have been approved to AS85049, a military specification for connector accessories designed to work with military connectors such as those built to MIL-DTL-38999. The AS85049 82 - 90 adapters feature side-entry band straps for easier installation and repair, and provide high-reliability under vibration due to the self-coupling locking nut. The adapters are offered in straight, 45°, and 90° formats.

Approved products include adapters and band straps for M85049 (/88-90) code 40, code 41 (/85-87), and code 54 (/82-84) in all three angles in cadmium-plated and electroless-plated aluminum. Also included are 1/8" (/128-7 and 8) and 1/4" (/128-1 to -4) bands. This product is designed to work with MIL-DTL-38999 Series III and IV, MIL-DTL-38999 Series I and II, AS50151, MIL-DTL-26482 Series II, SAE AS81703 Series III, and MIL-DTL-83723 Series III.

TE Connectivity
www.te.com

Carbon-graphite bushings

Carbon- graphite bushings for gear pumps support both the drive gear shaft and the idler gear shaft.

The carbon-graphite can use aviation fuel as the bushing lubricant, since the material has no atomic attraction to a metallic shaft. The thin fuel film is sufficient to lubricate metallic shafts running in the carbon-graphite bushings.

FYI

• Self-lubricating – they can run dry for short periods of time without catastrophic pump failure or significant wear.
• Dimensionally stable – permitting close bushing to shaft running clearances required in gear pump applications.
• More information on carbon-graphite bushings is available at http://bit.ly/181gVe6.

Metallized Carbon Corp.
www.metcar.com

Hybrid servo cables

Two hybrid servo cables have been designed to meet the requirements of the emerging hiperface DSL control architecture. The OLFLEX servo FD 7DSL features a polyurethane jacket for use in cable tracks, while the OLFLEX servo 7DSL is PVC jacketed for fixed installations. Both products meet hiperface DSL standards and have UL AWM approvals.

The servo cables have a polypropylene insulation that delivers better electrical properties than PVC. Polypropylene insulation can be substantially thinner than PVC for a roughly 20% reduction in overall cable diameter.

Lapp Group Co.
www.lappgroup.com

Aerospace sealant nozzles

Semband flexible nozzles are easily shaped by hand at room temperature for use with cartridges to apply aerospace sealants. The nozzles are available in SEMCO packaging and application systems.

Developed to respond to customer needs for on-site shaping to meet specific requirements, Sembend nozzles are made with a proprietary plastic material, and operators can slowly bend them with their hands to form their desired shape, avoiding the use of heat or tools. Sembend nozzles are available in standard orifice sizes and lengths as well as additional geometries by request.

To find out more about Sembend nozzles: http://bit.ly/19Ep34W.

PPG Aerospace
www.ppgaerospace.com