Boeing will build and test three U.S. Army CH-47F Block II Chinook helicopters as part of a modernization effort that will likely bring another two decades of work to the company's Philadelphia, Pennsylvania site.
A recent $276 million Army contract will fund those helicopters, which will validate technology advancements that will increase the iconic helicopter’s lifting power.
"The Army's only heavy-lift helicopter exists to deliver decisive combat power for our ground commanders," said Col. Greg Fortier, U.S. Army project manager for cargo helicopters. "The Cargo family is anxious to build upon Col. Rob Barrie's efforts to establish this critical program and deliver an adaptive air vehicle. Increasing payload capacity today enhances battlefield agility and prepares the Chinook for even greater performance gains in the future."
An improved drivetrain will transfer greater power from the engines to new, swept-tip Advanced Chinook Rotor Blades, which have been engineered to lift an additional 1,500 lb on their own. The current configuration of six fuel tanks – three on each side – will become two, allowing the aircraft to carry more fuel and shed weight. Additionally, the fuselage’s structure will be strengthened in critical areas to allow the aircraft to carry additional payload.
“This latest upgrade for the Chinook fleet is a tribute to the robustness of its original design and exemplifies its 55-year legacy of technological advancements,” said Chuck Dabundo, vice president, Cargo Helicopters and program manager, H-47. “The fact that the U.S. Army continues to use and value this platform and they are intending to continue to upgrade it to keep it flying for decades to come is a testament of the capabilities the Chinook team continues to bring.”
Boeing will begin building the test aircraft next year. The test program begins in 2019 and first delivery of the Block II Chinook is expected in 2023. Eventually, the Army will upgrade more than 500 Chinooks to Block II configuration.
Latest from Aerospace Manufacturing and Design
- America Makes announces winners of $2.1M project call
- HEULE's GH-K Tool
- Mastercam acquires FASTech
- Amada Weld Tech's AWS3 Pneumatic Active Welding System
- Pinpoint Accuracy: Okuma GENOS M560-V Cutting Demo
- The Monozukuri Principle Clears Each Okuma Machine for Takeoff
- Walter USA opens a new state-of-the-art campus
- Arnold Magnetic Technologies' Arnon Non Grain Oriented Electrical Steel